< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1094061016523056&ev=PageView&noscript=1" /> 12kW Stackable Home Energy Storage System – 15.36–61.44kWh - piforz.com
EN

12kW Stackable Home Energy Storage System – 15.36–61.44kWh

The Piforz horizontal stackable ESS pairs a 12kW inverter with 15.36kWh LiFePO4 battery modules for residential backup and off-grid energy storage.

Four storage configurations: Select 15.36, 30.72, 46.08 or 61.44kWh to match the energy reserve required for the application.

12kW-rated pure sine wave inverter: Provides 220/230V AC at 50/60Hz for compatible household loads, within the configured system’s power limits.

Solar and mains charging: Dual PV inputs with MPPT control and AC mains charging provide two ways to replenish stored energy.

LiFePO4 battery for repeated cycling: Cycle life is specified at at least 8,000 cycles under 75% depth of discharge at 25°C.

Module-level battery management: Each battery module includes a BMS for voltage, current and temperature monitoring, cell balancing and protection.

Parameter Category Detailed Specifications
Product type Horizontal stackable home energy storage system
Inverter reference INV-4812000Pro
Battery references BAT-512300 / BAT-512600 / BAT-512900 / BAT-5121200
Battery configurations 1 / 2 / 3 / 4 × 15.36kWh modules
Total battery energy 15.36 / 30.72 / 46.08 / 61.44kWh
Nominal battery capacity 300 / 600 / 900 / 1,200Ah
Battery chemistry / nominal voltage LiFePO4 / 51.2V
Cycle life ≥8,000 cycles at 75% DOD, 25°C
Inverter rated AC output 12kVA / 12kW; pure sine wave
AC output voltage / frequency 220/230V AC ±5%; 50/60Hz
AC output arrangement Main and second outputs; total AC output limit: 12kW
AC input 230V AC; 50/60Hz automatic detection
AC input voltage range 170–280V AC (computer mode); 90–280V AC (household appliance mode)
Transfer time 10ms (computer mode); 20ms (household appliance mode)
Solar charging Dual PV inputs with MPPT control
MPPT voltage range 60–500V DC
Maximum PV open-circuit voltage 500V DC
Maximum PV input current 18A × 2
Inverter charging limits PV: up to 160A; mains: up to 120A; combined: up to 160A
Battery voltage settings Charge cutoff: 58.4V; discharge cutoff: 44V; float: 56V
Battery management Voltage, current and temperature monitoring; cell balancing; overcharge, overdischarge and overcurrent protection
Display / communication LCD; RS232 / RS485 / CAN
Grid-connected operation Not supported
Inverter parallel function Listed as supported; compatible units and system configuration require confirmation
Protection rating IP21; protected indoor installation
Battery charging temperature 0°C to 50°C
Battery discharging temperature −15°C to 50°C
Inverter net / packed weight 25.3kg / 28kg
Battery module net weight 105.5kg (middle module); 110kg (bottom module)
Battery module packed weight 121kg (middle module); 127kg (bottom module)
Inverter dimensions 750 × 450 × 180mm
Battery module dimensions 750 × 450 × 260mm (middle); 750 × 450 × 350mm (bottom)
Inverter package dimensions 825 × 530 × 260mm
Battery module package dimensions 815 × 425 × 520mm (middle); 815 × 520 × 520mm (bottom)

Four capacity options on one platform: Each 51.2V, 300Ah LiFePO4 battery module stores 15.36kWh. The documented configurations use one, two, three or four modules to provide 15.36, 30.72, 46.08 or 61.44kWh. This allows the energy reserve to be matched to the intended load profile and operating duration. Additional storage capacity does not increase the inverter’s 12kW rated output.

12kW inverter for compatible AC loads: The pure sine wave inverter supplies 220/230V AC at 50/60Hz. Main and secondary output connections are provided, with a combined 12kW AC limit. Available battery-only output also depends on the number of modules, battery discharge limits and system settings; the inverter rating alone is not a guarantee of sustained battery output.

Dual PV inputs and mains charging: MPPT solar charging and a nominal 230V AC mains input provide two charging routes. The specification lists two PV inputs at up to 18A each, with a 60–500V DC MPPT range and a 500V DC maximum open-circuit voltage. The solar array’s power, voltage and current configuration should be confirmed for the supplied inverter version before ordering.

Charging settings matched to the battery configuration: The inverter’s published charging limits are 160A for PV, 120A for mains and 160A combined. The installed charging current must also respect the selected battery configuration and BMS settings. PV and mains charging limits should not be added together as a higher combined rating.

LiFePO4 storage and controlled cycling: The battery specification lists at least 8,000 cycles at 75% depth of discharge and 25°C. Lithium iron phosphate cells and module-level BMS control support repeated energy storage use. Actual usable energy and service life depend on operating temperature, load, charging settings and the cycling pattern.

Independent management in each battery module: Each module monitors cell voltage, current and temperature and provides balancing. The battery specification includes overcharge, overdischarge and overcurrent protection. Communication interfaces include RS232, RS485 and CAN, with compatibility reviewed for the intended system configuration.

Stacked enclosure with front displays and casters: The horizontal modules form a floor-standing stack, with displays at the front and connections at the side. Casters on the bottom unit assist positioning on a suitable level surface. The specification table separates inverter, middle-module and bottom-module weights so handling can be planned for the chosen configuration.

Backup and off-grid installation planning: The system is rated IP21 for a protected indoor installation. Transfer time is specified at 10ms in computer mode or 20ms in household appliance mode. Grid-connected operation is not supported by the listed inverter version. Its parallel function is listed as supported, but unit compatibility and the complete electrical design must be confirmed for each installation.

OEM and private-label supply: Piforz supports OEM and private-label cooperation for importers, wholesalers and energy brands. Share your branding requirements to confirm the available customization scope for this model.

Sample evaluation and wholesale orders: Sample orders are supported for product evaluation. MOQ, bulk pricing and production lead time are quoted according to the required configuration and order quantity. Packaging and shipment requirements can be discussed during quotation.

Target-market specifications and certification: Share your destination country and application requirements to confirm product suitability and the relevant model-specific certification documentation. The electrical configuration and operating limits for this version are listed in the specification table above.

Warranty and technical after-sales support: Warranty service and technical support are available. Request the applicable warranty terms, coverage and support arrangements when evaluating the product for your market.

Scroll to Top