| Parameter Category | Detailed Specifications |
|---|---|
| Product type | All-in-one home energy storage system |
| Inverter / battery reference | INV 12000 / BAT 512628 |
| Battery energy | 32,000Wh (32kWh) |
| Battery type | LiFePO4 |
| Nominal battery voltage / capacity | 51.2V / 628Ah |
| Inverter rated output | 12kVA / 12kW; pure sine wave |
| AC output voltage / frequency | 220/240V AC ±5%; 50/60Hz |
| AC output connections | Terminal block: up to 12kW; 2 AC sockets: 3kW each; total AC output limit: 12kW |
| AC input | 230V AC; 50/60Hz automatic detection |
| AC input voltage range | 170–280V AC (computer mode); 90–280V AC (household appliance mode) |
| Transfer time | 10ms (computer mode); 20ms (household appliance mode) |
| Solar charging | Built-in MPPT; 2 PV inputs |
| Maximum total PV input power | 15,000W (7,500W + 7,500W) |
| MPPT voltage range | 120–450V DC |
| Maximum PV open-circuit voltage | 500V DC |
| Maximum PV input current | 22.5A + 22.5A |
| Maximum PV / mains charging current | 160A / 120A; maximum combined charging current: 160A |
| Battery charge / discharge limits | Maximum continuous charging: 160A (adjustable); maximum continuous discharge: 200A |
| Battery voltage settings | Charge cutoff: 56.4V; discharge cutoff: 44V; float: 56V |
| Battery management | Overcharge, overdischarge and overcurrent protection |
| Display | LCD |
| Communication interfaces | RS232 / RS485 / dry contact; CAN connector shown in the interface layout |
| Grid connection / inverter paralleling | Grid-connected operation: not supported; inverter paralleling: not supported |
| Protection rating | IP21 |
| Battery charging temperature | 0°C to 50°C |
| Battery discharging temperature | −15°C to 50°C |
| Net weight | 238kg |
| Packed weight | 258kg |
| Package dimensions (L × W × H) | 780 × 470 × 780mm |
This all-in-one solar energy storage system integrates the inverter, battery and MPPT charge controller in a single cabinet. It connects compatible solar panels and an AC mains supply to a stored-energy system for residential backup and off-grid applications.
32kWh LiFePO4 storage for residential energy needs: The integrated battery is specified at 32kWh, with a nominal voltage of 51.2V and a capacity of 628Ah. It stores energy for household loads when needed. Available runtime depends on connected load, battery state of charge, operating settings and conversion losses.
12kW pure sine wave inverter: The inverter provides 220/240V AC output at 50/60Hz. Its terminal-block output is rated up to 12kW, while the two AC sockets are specified at 3kW each. All outputs share the system’s 12kW total AC limit; loads must also remain within the available source power and battery discharge limits.
Built-in MPPT with two solar inputs: The two PV inputs support a combined maximum of 15kW, specified as 7.5kW per input. The MPPT operating range is 120–450V DC, with a maximum PV open-circuit voltage of 500V DC and a maximum input current of 22.5A per input. Solar array selection should match these electrical limits.
Mains charging as an additional energy source: The unit accepts a nominal 230V AC supply and automatically detects 50/60Hz. Maximum mains charging current is 120A; PV charging supports up to 160A. The maximum combined charging current is 160A, so the individual charging-current ratings are not additive.
Source transfer for backup applications: The specified transfer time is 10ms in computer mode and 20ms in household appliance mode. These figures describe source switching, rather than zero-interruption operation. This version does not support grid-connected operation or inverter paralleling.
Battery management and protection: The integrated BMS provides overcharge, overdischarge and overcurrent protection. The specification lists a 56.4V charging cutoff, a 44V discharge cutoff and a 56V float setting. Battery charging is specified for 0°C to 50°C and discharging for −15°C to 50°C.
Clear local status and accessible connections: The front LCD provides a local status reference. Rear connections include AC terminals, two AC sockets, two PV inputs and communication connections. RS232, RS485 and dry-contact interfaces are listed in the specification; the interface diagram also identifies a CAN connector. Protocol compatibility should be confirmed for the intended system.
Integrated floor-standing cabinet: The inverter, MPPT charging and battery are housed together, helping keep the main system components in one location. Built-in casters assist positioning on a suitable level surface. With a net weight of 238kg, the unit requires appropriate handling and installation planning.










