< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1094061016523056&ev=PageView&noscript=1" /> 6kW All-in-One Home Energy Storage System – 10kWh Battery - piforz.com
EN

6kW All-in-One Home Energy Storage System – 10kWh Battery

The Piforz 6kW / 10kWh all-in-one ESS brings battery storage, solar charging and AC power together for residential backup and off-grid applications.

All-in-one integrated cabinet: Battery, inverter and MPPT charging are housed together, reducing the need for separate core system enclosures.

10kWh stored-energy reserve: A 51.2V, 200Ah battery stores energy for household use when solar generation is low or mains power is unavailable.

6kW pure sine wave AC output: Supplies compatible household loads at 220/240V AC, with hardwired and AC socket connections.

9kW solar input, plus mains charging: Built-in MPPT supports solar charging, while mains power provides an additional way to recharge the battery.

Built-in BMS protection: Overcharge, overdischarge and overcurrent protection help manage the battery during charging and everyday use.

Parameter Category Detailed Specifications
Product type Floor-standing all-in-one home energy storage system
Inverter / battery reference INV 6000 / BAT 512200
Battery energy (specified) 10,000Wh (10kWh)
Nominal battery voltage / capacity 51.2V / 200Ah
Cycle life ≥8,000 cycles at 75% DOD, 25°C
Inverter rated output 6kVA / 6kW; pure sine wave
AC output voltage / frequency 220/240V AC ±5%; 50/60Hz
AC output connections Hardwired output: up to 6kW; 3 AC sockets: 2kW each; total AC output limit: 6kW
AC input 230V AC; 50/60Hz automatic detection
AC input voltage range 170–280V AC (computer mode); 90–280V AC (household appliance mode)
Transfer time 10ms (computer mode); 20ms (household appliance mode)
Maximum PV input power 9,000W
Solar charging mode Built-in MPPT
MPPT voltage range 60–450V DC
Maximum PV open-circuit voltage 500V DC
Maximum PV input current 27A
Inverter charging limits Maximum PV: 120A; mains: 120A; combined: 120A
Battery current limits Maximum continuous charging: 160A (adjustable); maximum continuous discharge: 150A
Battery voltage settings Charge cutoff: 56.4V; discharge cutoff: 44V; float: 56V
Battery management Overcharge, overdischarge and overcurrent protection
Display LCD
Communication interfaces RS232 / RS485 / dry contact; CAN connector identified in the interface diagram
Grid connection / inverter paralleling Grid-connected operation: not supported; inverter paralleling: not supported
Protection rating IP21; protected indoor installation
Battery charging temperature 0°C to 50°C
Battery discharging temperature −15°C to 50°C
Net weight 99.8kg
Packed weight 120.6kg
Product dimensions 1,040 × 460 × 240mm
Package dimensions 1,060 × 480 × 260mm

Battery, inverter and MPPT in one enclosure: The floor-standing cabinet contains the battery, 6kW inverter and solar charge controller. The integrated arrangement brings the main energy storage and power-conversion components together, while the front LCD gives a local reference for operating status. Side handles and casters assist positioning during installation.

10kWh battery storage for backup applications: The battery is specified at 10,000Wh, with a nominal voltage of 51.2V and capacity of 200Ah. It provides stored energy for compatible household loads when solar input is reduced or mains power is interrupted. Available runtime depends on load, state of charge, operating settings and conversion losses.

6kW pure sine wave output with multiple connections: The inverter supplies 220/240V AC at 50/60Hz. A hardwired output is specified at up to 6kW, and three AC sockets are listed at 2kW each. All connected outputs share the 6kW total limit, so socket ratings and the hardwired rating must not be added together.

9kW MPPT solar charging: The solar input supports up to 9kW with a 60–450V DC MPPT operating range, a 500V DC maximum open-circuit voltage and a 27A maximum input current. These limits provide the basis for selecting and arranging a compatible photovoltaic array.

Mains charging and backup transfer: The AC input accepts a nominal 230V supply and automatically detects 50/60Hz. PV and mains charging each support up to 120A through the inverter, with a 120A combined limit. Source transfer is specified at 10ms in computer mode and 20ms in household appliance mode.

Battery protection and specified cycle life: The BMS provides overcharge, overdischarge and overcurrent protection. The battery specification lists at least 8,000 cycles at 75% depth of discharge and 25°C. Battery charging is specified from 0°C to 50°C and discharging from −15°C to 50°C; actual service life depends on the operating environment and usage pattern.

Local display and communication connections: The front LCD supports local status checks. RS232, RS485 and dry-contact connections are listed in the electrical specification; a CAN connector is also identified in the interface diagram. The relevant communication protocol and external equipment compatibility should be confirmed for the intended application.

Indoor placement and handling: The IP21 cabinet is intended for a protected indoor location. Its specified dimensions are 1,040 × 460 × 240mm and net weight is 99.8kg. Handles and casters help with positioning, while the installation plan must allow for the unit’s weight, ventilation and access to the side connections. This version does not support grid-connected operation or inverter paralleling.

OEM and private-label supply: Piforz supports OEM and private-label cooperation for importers, wholesalers and energy brands. Share your branding requirements to confirm the available customization scope for this model.

Sample evaluation and wholesale orders: Sample orders are supported for product evaluation. MOQ, bulk pricing and production lead time are quoted according to the required configuration and order quantity. Packaging and shipment requirements can be discussed during quotation.

Target-market specifications and certification: Share your destination country and application requirements to confirm product suitability and the relevant model-specific certification documentation. The electrical configuration and operating limits for this version are listed in the specification table above.

Warranty and technical after-sales support: Warranty service and technical support are available. Request the applicable warranty terms, coverage and support arrangements when evaluating the product for your market.

 

Scroll to Top