< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1094061016523056&ev=PageView&noscript=1" /> 6kW Stackable Home Energy Storage System – 5.12kWh LiFePO4 - piforz.com
EN

6kW Stackable Home Energy Storage System – 5.12kWh LiFePO4

The Piforz vertical stackable ESS combines a 6kW inverter with modular LiFePO4 storage for residential backup and solar energy applications.

5.12kWh modular storage: Choose a single 5.12kWh battery module or a two-module 10.24kWh configuration to match the required energy reserve.

6kW pure sine wave inverter: Provides 220/230V AC at 50/60Hz for compatible household appliances and electrical loads.

9kW MPPT solar input: Supports solar charging through a built-in MPPT controller, with mains charging as an additional option.

LiFePO4 battery for repeated use: Cycle life is specified at at least 8,000 cycles under 80% depth of discharge at 25°C.

Built-in battery management: Cell voltage, current and temperature monitoring, balancing and electrical protection support controlled battery operation.

Parameter Category Detailed Specifications
Product type Vertical stackable home energy storage system
Inverter reference INV 486000
Battery configuration 1 × 5.12kWh module (100Ah); 2 × 5.12kWh modules (200Ah total)
Battery references BAT 512100 / BAT 512200
Battery energy 5,120Wh / 10,240Wh
Battery chemistry / nominal voltage LiFePO4 / 51.2V
Cycle life ≥8,000 cycles at 80% DOD, 25°C
Inverter rated AC output 6kVA / 6kW; pure sine wave
AC output voltage / frequency 220/230V AC ±5%; 50/60Hz
AC output arrangement Single output; total rated AC output: 6kW
AC input 230V AC; 50/60Hz automatic detection
AC input voltage range 170–280V AC (computer mode); 90–280V AC (household appliance mode)
Transfer time 10ms (computer mode); 20ms (household appliance mode)
Maximum PV input power 9,000W
Solar charging mode Built-in MPPT
MPPT voltage range 60–500V DC
Maximum PV open-circuit voltage 500V DC
Maximum PV input current 27A
Inverter charging limits Maximum PV: 120A; mains: 120A; combined: 120A
Battery charging limit 100A continuous; system settings must remain within the battery limit
Battery voltage settings Charge cutoff: 58.4V; discharge cutoff: 44V; float: 56V
Battery management Voltage, current and temperature monitoring; cell balancing; overcharge, overdischarge and overcurrent protection
Display / communication LCD; RS232 / RS485 / CAN
Inverter paralleling / grid-connected operation Not supported for the specified INV 486000 configuration
Protection rating IP21; protected indoor installation
Battery charging temperature 0°C to 50°C
Battery discharging temperature −15°C to 50°C
Inverter net / packed weight 16.8kg / 19.8kg
Battery net weight 51.8kg (one-module configuration); 103.6kg (two-module configuration); inverter excluded
Battery packed weight 63.8kg (one-module configuration); 127.6kg (two-module configuration); inverter excluded
Inverter dimensions 600 × 318 × 210mm
Battery module dimensions 600 × 430 × 210mm
Inverter package dimensions 680 × 510 × 300mm
Single battery package dimensions 685 × 515 × 400mm

Modular capacity for different energy needs: The base configuration pairs the inverter with a 51.2V, 100Ah LiFePO4 battery containing 5.12kWh of energy. A second matching module provides a 200Ah, 10.24kWh configuration. These two documented configurations allow the storage capacity to be selected independently of the inverter’s 6kW rating. Additional battery capacity increases the energy reserve; it does not increase rated AC output.

6kW pure sine wave AC power: The inverter delivers 220/230V AC at 50/60Hz through a single output. Its 6kW rating supports compatible household loads whose running and starting demands fit the system’s available power. Appliance selection should account for both inverter capacity and the connected battery configuration.

9kW solar input with MPPT control: The built-in MPPT charge controller supports up to 9kW of photovoltaic input. The specification lists a 60–500V DC MPPT range, a 500V DC maximum open-circuit voltage and a 27A maximum PV input current. The solar array must be designed within all applicable voltage and current limits.

Mains charging and source transfer: A nominal 230V AC supply offers another route for charging the battery. The inverter supports up to 120A charging, while the battery specification lists a 100A continuous charging limit; the installed system must be configured to the battery limit. Source transfer is specified at 10ms in computer mode or 20ms in household appliance mode.

LiFePO4 cells and specified cycle life: The battery uses lithium iron phosphate cells. Its published cycle life is at least 8,000 cycles at 80% depth of discharge and 25°C. These test conditions matter when comparing battery options; actual service life depends on temperature, charging settings and the application’s cycling pattern.

Battery monitoring, balancing and protection: The BMS monitors cell voltage, current and temperature and provides cell balancing. Overcharge, overdischarge and overcurrent protection are listed in the battery specification. RS232, RS485 and CAN interfaces support system communication, with protocol compatibility checked for the intended installation.

Vertical arrangement with accessible connections: The inverter and battery modules sit in a vertical floor-standing arrangement. Side-mounted power and communication connections and the front display provide access for setup and status checks. Battery modules and the inverter have separate weight and packaging entries in the specification table, making it easier to plan handling and shipment.

Protected indoor installation: The IP21 system should be installed in a protected indoor location with appropriate ventilation and access for servicing. Battery charging is specified from 0°C to 50°C and discharge from −15°C to 50°C. The INV 486000 configuration described here does not support inverter paralleling or grid-connected operation.

OEM and private-label supply: Piforz supports OEM and private-label cooperation for importers, wholesalers and energy brands. Share your branding requirements to confirm the available customization scope for this model.

Sample evaluation and wholesale orders: Sample orders are supported for product evaluation. MOQ, bulk pricing and production lead time are quoted according to the required configuration and order quantity. Packaging and shipment requirements can be discussed during quotation.

Target-market specifications and certification: Share your destination country and application requirements to confirm product suitability and the relevant model-specific certification documentation. The electrical configuration and operating limits for this version are listed in the specification table above.

Warranty and technical after-sales support: Warranty service and technical support are available. Request the applicable warranty terms, coverage and support arrangements when evaluating the product for your market.

 

Scroll to Top