< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1094061016523056&ev=PageView&noscript=1" /> 12kW All-in-One Home Energy Storage System – 32kWh LiFePO4 - piforz.com
EN

12kW All-in-One Home Energy Storage System – 32kWh LiFePO4

The Piforz 12kW / 32kWh home energy storage system brings solar charging, battery storage and AC power together for residential backup and off-grid applications.

All-in-one integrated design: Battery, inverter and MPPT charge controller share one cabinet, reducing the need to arrange these core components in separate enclosures.

32kWh LiFePO4 energy reserve: Stores energy for household use when solar generation is low or mains power is unavailable.

12kW-rated pure sine wave inverter: Delivers 220/240V AC at 50/60Hz for compatible appliances and household loads.

Up to 15kW solar input, plus mains charging: Two PV inputs and built-in MPPT support solar charging, with mains power providing an additional charging option.

Built-in BMS protection: Overcharge, overdischarge and overcurrent protection help manage the battery during charging and everyday use.

Parameter Category Detailed Specifications
Product type All-in-one home energy storage system
Inverter / battery reference INV 12000 / BAT 512628
Battery energy 32,000Wh (32kWh)
Battery type LiFePO4
Nominal battery voltage / capacity 51.2V / 628Ah
Inverter rated output 12kVA / 12kW; pure sine wave
AC output voltage / frequency 220/240V AC ±5%; 50/60Hz
AC output connections Terminal block: up to 12kW; 2 AC sockets: 3kW each; total AC output limit: 12kW
AC input 230V AC; 50/60Hz automatic detection
AC input voltage range 170–280V AC (computer mode); 90–280V AC (household appliance mode)
Transfer time 10ms (computer mode); 20ms (household appliance mode)
Solar charging Built-in MPPT; 2 PV inputs
Maximum total PV input power 15,000W (7,500W + 7,500W)
MPPT voltage range 120–450V DC
Maximum PV open-circuit voltage 500V DC
Maximum PV input current 22.5A + 22.5A
Maximum PV / mains charging current 160A / 120A; maximum combined charging current: 160A
Battery charge / discharge limits Maximum continuous charging: 160A (adjustable); maximum continuous discharge: 200A
Battery voltage settings Charge cutoff: 56.4V; discharge cutoff: 44V; float: 56V
Battery management Overcharge, overdischarge and overcurrent protection
Display LCD
Communication interfaces RS232 / RS485 / dry contact; CAN connector shown in the interface layout
Grid connection / inverter paralleling Grid-connected operation: not supported; inverter paralleling: not supported
Protection rating IP21
Battery charging temperature 0°C to 50°C
Battery discharging temperature −15°C to 50°C
Net weight 238kg
Packed weight 258kg
Package dimensions (L × W × H) 780 × 470 × 780mm

This all-in-one solar energy storage system integrates the inverter, battery and MPPT charge controller in a single cabinet. It connects compatible solar panels and an AC mains supply to a stored-energy system for residential backup and off-grid applications.

32kWh LiFePO4 storage for residential energy needs: The integrated battery is specified at 32kWh, with a nominal voltage of 51.2V and a capacity of 628Ah. It stores energy for household loads when needed. Available runtime depends on connected load, battery state of charge, operating settings and conversion losses.

12kW pure sine wave inverter: The inverter provides 220/240V AC output at 50/60Hz. Its terminal-block output is rated up to 12kW, while the two AC sockets are specified at 3kW each. All outputs share the system’s 12kW total AC limit; loads must also remain within the available source power and battery discharge limits.

Built-in MPPT with two solar inputs: The two PV inputs support a combined maximum of 15kW, specified as 7.5kW per input. The MPPT operating range is 120–450V DC, with a maximum PV open-circuit voltage of 500V DC and a maximum input current of 22.5A per input. Solar array selection should match these electrical limits.

Mains charging as an additional energy source: The unit accepts a nominal 230V AC supply and automatically detects 50/60Hz. Maximum mains charging current is 120A; PV charging supports up to 160A. The maximum combined charging current is 160A, so the individual charging-current ratings are not additive.

Source transfer for backup applications: The specified transfer time is 10ms in computer mode and 20ms in household appliance mode. These figures describe source switching, rather than zero-interruption operation. This version does not support grid-connected operation or inverter paralleling.

Battery management and protection: The integrated BMS provides overcharge, overdischarge and overcurrent protection. The specification lists a 56.4V charging cutoff, a 44V discharge cutoff and a 56V float setting. Battery charging is specified for 0°C to 50°C and discharging for −15°C to 50°C.

Clear local status and accessible connections: The front LCD provides a local status reference. Rear connections include AC terminals, two AC sockets, two PV inputs and communication connections. RS232, RS485 and dry-contact interfaces are listed in the specification; the interface diagram also identifies a CAN connector. Protocol compatibility should be confirmed for the intended system.

Integrated floor-standing cabinet: The inverter, MPPT charging and battery are housed together, helping keep the main system components in one location. Built-in casters assist positioning on a suitable level surface. With a net weight of 238kg, the unit requires appropriate handling and installation planning.

Scroll to Top