| Parameter Category | Detailed Specifications |
|---|---|
| Product type | Vertical stackable home energy storage system |
| Inverter reference | INV 486000 |
| Battery configuration | 1 × 5.12kWh module (100Ah); 2 × 5.12kWh modules (200Ah total) |
| Battery references | BAT 512100 / BAT 512200 |
| Battery energy | 5,120Wh / 10,240Wh |
| Battery chemistry / nominal voltage | LiFePO4 / 51.2V |
| Cycle life | ≥8,000 cycles at 80% DOD, 25°C |
| Inverter rated AC output | 6kVA / 6kW; pure sine wave |
| AC output voltage / frequency | 220/230V AC ±5%; 50/60Hz |
| AC output arrangement | Single output; total rated AC output: 6kW |
| AC input | 230V AC; 50/60Hz automatic detection |
| AC input voltage range | 170–280V AC (computer mode); 90–280V AC (household appliance mode) |
| Transfer time | 10ms (computer mode); 20ms (household appliance mode) |
| Maximum PV input power | 9,000W |
| Solar charging mode | Built-in MPPT |
| MPPT voltage range | 60–500V DC |
| Maximum PV open-circuit voltage | 500V DC |
| Maximum PV input current | 27A |
| Inverter charging limits | Maximum PV: 120A; mains: 120A; combined: 120A |
| Battery charging limit | 100A continuous; system settings must remain within the battery limit |
| Battery voltage settings | Charge cutoff: 58.4V; discharge cutoff: 44V; float: 56V |
| Battery management | Voltage, current and temperature monitoring; cell balancing; overcharge, overdischarge and overcurrent protection |
| Display / communication | LCD; RS232 / RS485 / CAN |
| Inverter paralleling / grid-connected operation | Not supported for the specified INV 486000 configuration |
| Protection rating | IP21; protected indoor installation |
| Battery charging temperature | 0°C to 50°C |
| Battery discharging temperature | −15°C to 50°C |
| Inverter net / packed weight | 16.8kg / 19.8kg |
| Battery net weight | 51.8kg (one-module configuration); 103.6kg (two-module configuration); inverter excluded |
| Battery packed weight | 63.8kg (one-module configuration); 127.6kg (two-module configuration); inverter excluded |
| Inverter dimensions | 600 × 318 × 210mm |
| Battery module dimensions | 600 × 430 × 210mm |
| Inverter package dimensions | 680 × 510 × 300mm |
| Single battery package dimensions | 685 × 515 × 400mm |
Modular capacity for different energy needs: The base configuration pairs the inverter with a 51.2V, 100Ah LiFePO4 battery containing 5.12kWh of energy. A second matching module provides a 200Ah, 10.24kWh configuration. These two documented configurations allow the storage capacity to be selected independently of the inverter’s 6kW rating. Additional battery capacity increases the energy reserve; it does not increase rated AC output.
6kW pure sine wave AC power: The inverter delivers 220/230V AC at 50/60Hz through a single output. Its 6kW rating supports compatible household loads whose running and starting demands fit the system’s available power. Appliance selection should account for both inverter capacity and the connected battery configuration.
9kW solar input with MPPT control: The built-in MPPT charge controller supports up to 9kW of photovoltaic input. The specification lists a 60–500V DC MPPT range, a 500V DC maximum open-circuit voltage and a 27A maximum PV input current. The solar array must be designed within all applicable voltage and current limits.
Mains charging and source transfer: A nominal 230V AC supply offers another route for charging the battery. The inverter supports up to 120A charging, while the battery specification lists a 100A continuous charging limit; the installed system must be configured to the battery limit. Source transfer is specified at 10ms in computer mode or 20ms in household appliance mode.
LiFePO4 cells and specified cycle life: The battery uses lithium iron phosphate cells. Its published cycle life is at least 8,000 cycles at 80% depth of discharge and 25°C. These test conditions matter when comparing battery options; actual service life depends on temperature, charging settings and the application’s cycling pattern.
Battery monitoring, balancing and protection: The BMS monitors cell voltage, current and temperature and provides cell balancing. Overcharge, overdischarge and overcurrent protection are listed in the battery specification. RS232, RS485 and CAN interfaces support system communication, with protocol compatibility checked for the intended installation.
Vertical arrangement with accessible connections: The inverter and battery modules sit in a vertical floor-standing arrangement. Side-mounted power and communication connections and the front display provide access for setup and status checks. Battery modules and the inverter have separate weight and packaging entries in the specification table, making it easier to plan handling and shipment.
Protected indoor installation: The IP21 system should be installed in a protected indoor location with appropriate ventilation and access for servicing. Battery charging is specified from 0°C to 50°C and discharge from −15°C to 50°C. The INV 486000 configuration described here does not support inverter paralleling or grid-connected operation.
OEM and private-label supply: Piforz supports OEM and private-label cooperation for importers, wholesalers and energy brands. Share your branding requirements to confirm the available customization scope for this model.
Sample evaluation and wholesale orders: Sample orders are supported for product evaluation. MOQ, bulk pricing and production lead time are quoted according to the required configuration and order quantity. Packaging and shipment requirements can be discussed during quotation.
Target-market specifications and certification: Share your destination country and application requirements to confirm product suitability and the relevant model-specific certification documentation. The electrical configuration and operating limits for this version are listed in the specification table above.
Warranty and technical after-sales support: Warranty service and technical support are available. Request the applicable warranty terms, coverage and support arrangements when evaluating the product for your market.












