Detailed Specifications:
| Parameter Category | Detailed Specifications |
|---|---|
| Model | ZP4000 |
| Battery capacity | 4019Wh |
| Battery type | LiFePO4 |
| Cycle life | 3,000 full cycles to 80% original capacity at room temperature |
| Total output rating | 1200W |
| AC output | 3 parallel outlets; 230V, 50/60Hz; 1200W combined |
| AC waveform | Pure sine wave |
| AC charging input | 90–280V AC, 50/60Hz; 1200W max. |
| Solar charging input | XT60; 12–60V DC; 600W max. |
| USB-A1 / USB-A2 outputs | 5V/2.4A; 12W max. per port |
| USB-A3 / USB-A4 outputs | 5V/3A, 9V/2A, 12V/1.5A; 18W max. per port |
| USB-C1 / USB-C2 outputs | 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A; 65W max. per port |
| Display | LCD with battery level, input/output power, remaining/charging time and status indicators |
| LED light | Built-in spotlight; high, SOS and strobe modes |
| Cooling | Temperature-controlled fan cooling |
| Net weight | Approx. 34kg |
| Product dimensions | 440 × 260 × 320mm |
| Packed weight | 37kg |
| Package dimensions | 550 × 362 × 440mm |
| Package contents | ZP4000 power station, user manual, AC charging cable, MC4-to-XT60 solar charging cable |
The ZP4000 is a high-capacity LiFePO4 portable power station with 4019Wh of storage and a 1200W pure sine wave inverter. It combines AC and USB outputs with mains and solar charging for off-grid use, mobile work and compatible backup loads where stored energy is a priority.
4019Wh LiFePO4 energy reserve: The battery provides 4019Wh of stored energy for repeated use with compatible loads. Its lithium iron phosphate chemistry is specified for 3,000 full cycles to 80% of original capacity at room temperature. This capacity-focused configuration suits applications that need a substantial energy reserve within a 1200W output rating.
1200W pure sine wave AC output: Three parallel AC outlets supply 230V at 50/60Hz with a combined 1200W rating. They provide multiple connection points for compatible appliances and electronic equipment, with all outlets sharing the same total AC power limit. Load selection should account for both operating power and starting demand.
Up to 1200W AC charging: The AC input accepts a 90–280V, 50/60Hz supply at up to 1200W. It provides a mains charging route for replenishing the battery at a base location or between deployments. An AC charging cable is included in the standard package.
600W solar input through XT60: The XT60 solar input accepts compatible panels operating within a 12–60V range at up to 600W. This gives the ZP4000 a charging route for off-grid locations where a suitable solar array is available. The included MC4-to-XT60 cable connects the station to compatible panel cabling.
Two 65W USB-C outputs: Each USB-C output supports up to 65W, with voltage profiles from 5V to 20V. The two ports provide direct connections for compatible laptops and other USB-C electronics, allowing these devices to be powered without occupying the AC outlets.
Four USB-A outputs with two power levels: USB-A1 and USB-A2 each provide 5V / 2.4A, up to 12W. USB-A3 and USB-A4 each support up to 18W with 5V, 9V and 12V profiles. This combination offers separate charging connections for a range of compatible smaller devices alongside the USB-C and AC outputs.
Temperature-controlled fan cooling: The unit uses temperature-controlled fans for active cooling during operation. The cooling system manages airflow in response to temperature, supporting heat dissipation from the enclosure while the power station is being used.
LCD battery and power monitoring: The LCD displays battery level, input and output power, remaining and charging time, and status indicators. These readings help users monitor the energy reserve and connected load, and check charging activity without disconnecting equipment.
Integrated spotlight for low-light tasks: A built-in spotlight provides high, SOS and strobe modes. It adds a local light source for accessing equipment and connections in low light, using the same battery supply as the station’s other functions.
Dual handles for repositioning: The ZP4000 weighs approximately 34kg and measures 440 × 260 × 320mm. Two integrated handles provide grip points for repositioning the unit. These dimensions and weight are relevant when planning vehicle storage, workspace placement and handling arrangements.
