Detailed Specifications:
| Parameter Category | Detailed Specifications |
|---|---|
| Model | ZP1000 |
| Battery capacity | 902.4Wh |
| Battery type | LiFePO4 |
| Cell type | 60130 |
| Cycle life | More than 3,000 cycles |
| AC output | 2 outlets; 220V; 1000W rated |
| AC peak output | 1400W |
| AC waveform | Pure sine wave |
| Total combined output | 1000W across AC, DC, USB and LED loads |
| AC charging input | 150W max. |
| Solar charging input | 30–60V DC; 300W max. |
| Combined AC + solar charging | 450W max. |
| UPS transfer time | Less than 20ms |
| USB-A outputs | 3 ports; shared 5V/5A, 25W max. |
| USB-C output | 1 port; 5V/3A, 9V/2.22A, 12V/1.5A; 22.5W max. |
| Display | Front LCD |
| LED light | 10W |
| Charging temperature | 0°C to 40°C |
| Discharging temperature | −10°C to 45°C |
| Net weight | 7.8kg |
| Product dimensions | 239 × 170 × 224mm |
| Packed weight | 9kg |
| Package dimensions | 355 × 235 × 295mm |
| Package contents | ZP1000 power station, user manual, AC input cable, MC4-to-DC5525 solar charging cable |
The ZP1000 combines 902.4Wh of LiFePO4 storage with 1000W pure sine wave AC power in a compact 7.8kg unit. AC and solar charging, USB connections and a UPS function support portable power and compatible backup applications where both energy storage and handling matter.
902.4Wh LiFePO4 storage with over 3,000 cycles: The battery uses lithium iron phosphate cells and stores 902.4Wh of energy. Its cycle life of more than 3,000 cycles supports repeated charging and use for outdoor electronics, mobile equipment and compatible backup loads.
1000W pure sine wave AC power: Two 220V AC outlets supply compatible equipment with a 1000W rated output and a 1400W peak rating. The pure sine wave inverter provides AC power for devices that fit these ratings. Combined operating demand across the unit’s AC, DC, USB and LED functions must remain within the 1000W total output limit.
AC and solar charging with 450W combined input: The ZP1000 accepts up to 150W through its AC input and up to 300W from compatible solar panels within the 30–60V input range. Both sources can be connected for a combined maximum input of 450W. This gives users a choice of mains charging, solar charging or combined charging according to the power sources available.
UPS backup with less than 20ms transfer: The UPS function provides a specified transfer time of less than 20ms when mains power is interrupted. It can support backup applications using equipment that tolerates this transfer interval and remains within the station’s output rating. Compatibility depends on the connected equipment’s power demand and interruption tolerance.
USB charging alongside AC loads: One USB-C output supplies up to 22.5W for compatible portable electronics. Three USB-A ports share a total 5V / 5A output, up to 25W across the group. These connections allow smaller devices to charge directly while the two AC outlets remain available for other equipment.
Front LCD for power-status checks: A front-mounted LCD keeps power-status information visible while the unit is in use. The display and connection panel can be accessed from the same side, making it convenient to check the unit when connecting equipment or changing charging sources.
Built-in 10W LED light: The integrated 10W LED provides a local light source for campsite setup, equipment access and other low-light tasks. It gives users a lighting function from the same stored energy used for their connected devices, reducing the need to carry a separate light for these tasks.
Compact 7.8kg format for mobile use: The ZP1000 measures 239 × 170 × 224mm and weighs 7.8kg. A carry strap supports moving the unit between work areas and outdoor locations. Its compact enclosure is useful where storage space is limited, including vehicle-based and temporary power applications.









