Detailed Specifications:
| Parameter Category | Detailed Specifications |
|---|---|
| Model | AP2200B |
| Battery chemistry | Lithium iron phosphate (LiFePO4) |
| Battery capacity | 2232Wh |
| Nominal battery voltage / configuration | 48V / 15S1P |
| Cycle life | 3,000 cycles with >80% capacity retained at room temperature |
| Rated AC output | 2400W total across the AC outlets |
| AC waveform | Pure sine wave |
| AC outlets | 3 parallel AC outputs |
| AC voltage / frequency | 110V / 60Hz or 220V / 50Hz, depending on version |
| Inverter efficiency | >90% at full load |
| UPS transfer time | 20ms typical |
| AC charging input | 1500W max. |
| AC input voltage | 99–135V (110V version); 198–250V (220V version) |
| Solar / DC charging input | XT60; 12–60V DC; 20A max.; 800W max. |
| Car charging | 12V DC via the charging adapter cable |
| USB-C outputs | 2 ports: USB-C1 100W max.; USB-C2 22.5W max. |
| USB-C1 protocol | PD 2.0 / PD 3.0 (PPS) |
| USB-A outputs | 4 ports; 18W max. output rating; 5V/3A, 9V/2A, 12V/1.5A |
| DC output groups | 12V and 24V; DC sockets and car-style sockets |
| Display | LCD with battery level, input/output power, status and remaining-time information |
| LED light | 5W max.; low / high brightness, SOS and flashing modes |
| Protection functions | Overvoltage, undervoltage, overcurrent, short circuit, overload and temperature protection |
| Charging temperature | 0°C to 45°C |
| Discharging temperature | −10°C to 45°C |
| Cooling | Fan cooling |
| Net weight | 25kg |
| Product dimensions | 440 × 260 × 320mm |
| Packed weight | 27.5kg |
| Package dimensions | 550 × 362 × 440mm |
| Package contents | Power station, AC charging cable, car charging cable, solar charging cable, user instructions and warranty card |
The Piforz AP2200B combines a 2232Wh LiFePO4 battery, a 2400W pure sine wave inverter and multiple charging and output interfaces in one portable power station. Its electrical specifications and practical operating features support selection for home backup, outdoor use and mobile power applications.
LiFePO4 Battery for Repeated Use: The 48V battery system stores 2232Wh of energy and uses lithium iron phosphate cells. Its specified room-temperature cycle life is 3,000 cycles with more than 80% capacity retained. This combination of capacity and cycle performance supports regular use in portable energy applications. Available runtime depends on the connected load, conversion losses and operating conditions.
2400W Pure Sine Wave AC Output: The inverter supplies 2400W of rated AC power shared across three parallel outlets, with a specified full-load efficiency above 90%. Pure sine wave output supports compatible household appliances, electronic devices and tools. The specification lists 110V / 60Hz and 220V / 50Hz versions, allowing buyers to select the appropriate configuration for their destination market.
AC, Solar and Vehicle Charging: The AP2200B accepts up to 1500W AC charging power for recharging from a compatible mains supply. Its XT60 solar/DC input supports 12–60V DC, a maximum current of 20A and a maximum input power of 800W. A 12V vehicle charging option provides an additional way to replenish energy during travel. Paired with compatible solar panels, the unit can be used as a portable solar generator; solar panels are not included in the listed standard package.
USB and DC Connections: The USB-C1 port provides up to 100W and supports PD 2.0 / PD 3.0 with PPS, while USB-C2 provides up to 22.5W. Four USB-A ports support the specified 5V/3A, 9V/2A and 12V/1.5A output profiles. Separate 12V and 24V DC output groups provide connections for compatible DC equipment. Users can select the output type that matches each device’s voltage and charging requirements.
UPS Backup Function: With a typical switching time of 20ms, the UPS function transfers the supply to battery power when mains electricity is interrupted. It is suitable for backup applications where the connected equipment can tolerate this transfer time. The device’s load, start-up demand and transfer-time requirements should be checked when planning the installation.
Battery and Output Protection: The battery management system and output circuitry provide overvoltage, undervoltage, overcurrent, short-circuit, overload and temperature protection. Fan cooling supports heat dissipation during operation. The LCD provides operating information and protection alerts, helping users identify the unit’s status during charging and use.
LCD Monitoring and LED Lighting: The LCD displays battery percentage, input and output power, interface status and remaining-time information. Independent controls allow users to activate the required output groups. The integrated 5W LED offers low and high brightness settings together with SOS and flashing modes for lighting and signalling at temporary work or camping locations.

Portable Construction and Operating Conditions: The unit measures 440 × 260 × 320mm and weighs 25kg, with integrated handles for moving it between locations. The specified operating temperature range is 0°C to 45°C while charging and −10°C to 45°C while discharging. These whole-unit limits should be considered when selecting storage, transport and operating arrangements.
Product Applications: The AP2200B is suited to home emergency backup, camping, RV travel and mobile work where a portable power supply is required. Its AC, USB and DC connections support a range of compatible lighting, communication devices, laptops, cameras and selected appliances. Equipment selection should remain within the unit’s rated output and individual port limits.
Product Configuration and Packing: The standard package lists the power station, AC charging cable, car charging cable, solar charging cable, user instructions and a warranty card. Packed weight is 27.5kg, with package dimensions of 550 × 362 × 440mm. For wholesale and project enquiries, specify the destination market, AC voltage and plug requirements, order quantity and required product documentation.







